Due to our primary supplier moving locations over the seasonal break we will be unable to fulfil any orders made until Monday the 5th January. We apologise for any inconvenience this may cause. Dismiss
1x 10/100/1000Mbps Auto-Negotiation RJ45 port supporting Auto-MDI/MDIX
Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
Complies with IEEE 802.3ab and IEEE 802.3z
Extends fiber distance up to 20km
What This Product Does
The MC210CS is a media converter designed to convert 1000BASE-LX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-Link´s TL-MC1400 chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
Interface(s): 8 x 2.5G PON Ports 2 x 10 Gbps SFP+ Uplink Ports 1 x 10/100/1000 Mbps RJ45 Uplink Port 1 x RJ45 Console Port 1 x RJ45 MGMT Port 1 x Alarm Port (Reserved)
Button: Reset Button
Power Supply: “Dual Power Supplies: 2 AC, 2 DC or AC+DC, AC: 100V~240V, 50/60Hz DC: -38.4V~-72V Power Consumption: Max. 70W”
Data Rates: Downstream: 2.5 Gbps Upstream: 1.25 Gbps
Wavelength: Tx: 1490 nm Rx: 1310 nm
Fiber Type: 9/125um SMF (Single Mode Fiber)
Distance: 20 km
Max. Splitting Ratio: 1:128
DHCP: DHCP Server DHCP Relay
Multi-Service: Multi-Service Traffic Identify and Rate Limit
QoS: IEEE 802.1p/DSCP QoS Voice VLAN Auto VoIP
Routing: Static Routing
Mulitcast: IGMP Snooping MLD Snooping
Security: ACL 802.1x Authentication ARP Inspection IP Source Guard
ONU Security: Rouge ONU Detection and Isolation Uplink and Downlink Data Encryption
Management: “OMCI: Standard OMCI Management Supported
Compatibility: “TAPO battery-powered cameras like C400, C410, C420, C425 and more NOTE: The A201 solar panel can only connect to one camera”
Connectors: Output Port: Type-C *A Type-C to Micro USB adapter (Included) is required for a camera with a Micro USB charging port
Output: Charging Voltage: 5.2 V Max Charging Power: 2.5 W
IP Rating: IP65 Weatherproof
Additional Features: “High-Efficiency Solar Cells 4m Charging Cable Mount your solar panel on the wall or roof Adjustable angle 45 minutes of sunlight a day can keep TAPO cameras working 24/7 Operating Temperature: -20°C~45°C (-4°F~114°F) Storage Temperature: -40°C~60°C (-40°F~140°F) Operating Humidity: 10%~90%RH, Non-condensing Storage Humidity: 5%~90%RH, Non-condensing”
Weight/Dimensions: 173.42 x 120.42 x 15.7 mm
Package Contents: 1 x Tapo A201 Solar Panel 1 x Adjustable Mounting Bracket 6 x Mounting Screws 6 x Mounting Anchors 1 x Base Cover 6 x Waterproof Gaskets 2 x Screw Caps 1 x Cable Zip Tie 1 x Extension Wire 1 x Type-C to Micro USB Adapter 2 x Mounting Template Quick Start Guide
Interface(s): 16 x GPON Ports 4 x 10 Gbps SFP+ Uplink Ports 2 x 10/100/1000 Mbps RJ45 Uplink Ports 1 x RJ45 Console Port 1 x RJ45 MGMT Port 1 x Alarm Port
Button: Reset Button
Power Supply: “Dual Power Supply: 2 AC, 2DC or AC + DC AC: 100V~240V, 50/60 Hz DC: -38.4V~-72V Power Consumption: Max. 103W”
Data Rates: Downstream: 2.5 Gbps Upstream: 1.25 Gbps
Wavelength: Tx: 1490 nm Rx: 1310 nm
Fiber Type: 9/125um SMF (Single Mode Fiber)
Distance: 60 km
Max. Splitting Ratio: 1:128
DHCP: DHCP Server DHCP Relay
Multi-Service: Multi-Service Traffic Identify and Rate Limit
QoS: IEEE 802.1p/DSCP QoS Voice VLAN Auto VoIP
Routing: Static Routing
Mulitcast: IGMP Snooping MLD Snooping
Security: ACL 802.1x Authentication ARP Inspection IP Source Guard
ONU Security: Rouge ONU Detection and Isolation Uplink and Downlink Data Encryption
Management: “OMCI: Standard OMCI Management Supported
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behaviour or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
