Memory - Desktop

View:28/All/

Showing 197–211 of 211 results

  • £18.64

    Kingston FURY Beast DDR4 Memory

    • Low-profile heat spreader design
    • Cost-efficient, high-performance DDR4 upgrade
    • Intel XMP-ready
    • Ready for AMD Ryzen
     
     
     
    Low-profile heat spreader
    The sleek-looking new heat spreader is a great upgrade for your battle station’s style.

    High-performance, cost-effective upgrade
    Kingston FURY Beast DDR4 is the perfect choice for a system builder, or someone looking for an upgrade to jump start their sluggish system.

     

    Intel XMP-Ready
    Our engineers have predefined Intel Extreme Memory Profiles designed to maximize the performance of our memory modules .

    Ready for AMD Ryzen™
    Get memory that’s ready for Ryzen and will seamlessly integrate with your AMD-based system. A reliable, compatible performance boost for your build.

     

    12 in stock

    Kingston Fury Beast 8GB, DDR4, 2666MHz (PC4-21400), CL16, XMP, DIMM Memory

    £18.64 Add to basket
    Quick View
  • £18.29
    KVR16N11S8/4
    4GB 1Rx8 512M x 64-Bit PC3-12800 CL11 240-Pin DIMM
     
    ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
    contact fingers.
     
     
     
    Features
     
    • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
    • VDDQ = 1.5V (1.425V ~ 1.575V)
    • 800MHz fCK for 1600Mb/sec/pin
    • 8 independent internal bank
    • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
    • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
    • 8-bit pre-fetch
    • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
    • Bi-directional Differential Data Strobe
    • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
    • On Die Termination using ODT pin
    • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
    • Asynchronous Reset
    • PCB : Height 0.740” (18.75mm), single sided component

    9 in stock

    Kingston 4GB, DDR3, 1600MHz (PC3-12800), CL11, DIMM Memory, Single Rank

    £18.29 Add to basket
    Quick View
  • £18.22

    GAMMIX D35 DDR4 – Full Throttle
     

    • Compact Low-Profile Heatsink Design
    • Top Quality RAM for High Durability
    • Higher Performance and Reliability
    • Works with the Latest AMD Platforms
    • Supports Intel® XMP 2.0 for easy overclocking
    • RoHS compliant
    • Operating temperature: 0°C to 85°C
    • Storage temperature: -20°C to 65°C
    • Operating voltage: 1.35V
    • Dimensions(LxWxH): 133.35 x 34 x 5.9mm
    • Warranty: Limited Lifetime Warranty
     
     
     

    Compact Low-Profile Heatsink Design
    GAMMIX D35's composed and understated triangular outline is specifically designed for gamers with unique personalities. The D35's small heatsink allows for easy installation in small chassis.
     

     

    Top Quality RAM for High Durability
    The GAMMIX D35 has undergone strict selection and screening procedures, passing reliability and compatibility tests, and delivers a strong and durable product that epitomizes the highest of quality!
     

     

    Higher Performance and Reliability
    Using only the highest quality IC chips and PCBs, the GAMMIX D35 is made to deliver higher overclocking performance and reliability.
     

     

    Works with the Latest AMD Platforms
    ADATA memory have been tested and verified to work with the latest AMD platforms for hassle-free compatibility and excellent overclocking performance.
     

     

    Supports Intel® XMP 2.0
    Intel® Extreme Memory Profile (XMP) 2.0 makes overclocking a snap and enhances system stability. Instead of adjusting individual parameters in BIOS, you can do it right through your PC's operating system.

     

    19 in stock

    ADATA XPG GAMMIX D35 8GB, DDR4, 3600MHz (PC4-28800), CL18, XMP 2.0, DIMM Memory, Black

    £18.22 Add to basket
    Quick View
  • £17.86

    Stable and Compatible

     
    • Original chips – Selected original chips, strict inspection process, 8-layer PCB board, stable performance.
    • Aluminum alloy vest – for strong heat dissipation effect, low working temperature, more stable operation
    • Gold-plated craft gold finger – Gold plating process, stronger conductivity and corrosion resistance

     

    11 in stock

    Netac Shadow Red, 8GB, DDR4, 3200MHz (PC4-25600), CL16, DIMM Memory

    £17.86 Add to basket
    Quick View
  • £17.82

    GAMMIX D35 DDR4 – Full Throttle
     

    • Compact Low-Profile Heatsink Design
    • Top Quality RAM for High Durability
    • Higher Performance and Reliability
    • Works with the Latest AMD Platforms
    • Supports Intel® XMP 2.0 for easy overclocking
    • RoHS compliant
    • Operating temperature: 0°C to 85°C
    • Storage temperature: -20°C to 65°C
    • Operating voltage: 1.35V
    • Dimensions(LxWxH): 133.35 x 34 x 5.9mm
    • Warranty: Limited Lifetime Warranty
     
     
     

    Compact Low-Profile Heatsink Design
    GAMMIX D35's composed and understated triangular outline is specifically designed for gamers with unique personalities. The D35's small heatsink allows for easy installation in small chassis.
     

     

    Top Quality RAM for High Durability
    The GAMMIX D35 has undergone strict selection and screening procedures, passing reliability and compatibility tests, and delivers a strong and durable product that epitomizes the highest of quality!
     

     

    Higher Performance and Reliability
    Using only the highest quality IC chips and PCBs, the GAMMIX D35 is made to deliver higher overclocking performance and reliability.
     

     

    Works with the Latest AMD Platforms
    ADATA memory have been tested and verified to work with the latest AMD platforms for hassle-free compatibility and excellent overclocking performance.
     

     

    Supports Intel® XMP 2.0
    Intel® Extreme Memory Profile (XMP) 2.0 makes overclocking a snap and enhances system stability. Instead of adjusting individual parameters in BIOS, you can do it right through your PC's operating system.

     

    16 in stock

    ADATA XPG GAMMIX D35 8GB, DDR4, 3200MHz (PC4-25600), CL16, XMP 2.0, DIMM Memory, Black

    £17.82 Add to basket
    Quick View
  • £16.81
    ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA
    components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

     
     
    Features
    • Power Supply: VDD=1.2V Typical
    • VDDQ = 1.2V Typical
    • VPP – 2.5V Typical
    • VDDSPD=2.2V to 3.6V
    • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
    • Low-power auto self refresh (LPASR)
    • Data bus inversion (DBI) for data bus
    • On-die VREFDQ generation and calibration
    • Single-rank
    • On-board I2 serial presence-detect (SPD) EEPROM
    • 16 internal banks; 4 groups of 4 banks each
    • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
    • Selectable BC4 or BL8 on-the-fly (OTF)
    • Fly-by topology
    • Terminated control command and address bus
    • PCB: Height 1.23” (31.25mm)
    • RoHS Compliant and Halogen-Free

    22 in stock

    Kingston 8GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

    £16.81 Add to basket
    Quick View
  • £16.74
     
    ValueRAM's KVR32N22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
     
    • Power Supply: VDD = 1.2V Typical
    • VDDQ = 1.2V Typical
    • VPP = 2.5V Typical
    • VDDSPD = 2.2V to 3.6V
    • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
    • Low-power auto self refresh (LPASR)
    • Data bus inversion (DBI) for data bus
    • On-die VREFDQ generation and calibration
    • Single-rank
    • On-board I2 serial presence-detect (SPD) EEPROM
    • 16 internal banks; 4 groups of 4 banks each
    • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
    • Selectable BC4 or BL8 on-the-fly (OTF)
    • Fly-by topology
    • Terminated control command and address bus
    • PCB: Height 1.23” (31.25mm)
    • RoHS Compliant and Halogen-Free

    1005 in stock

    Kingston 8GB, DDR4, 3200MHz (PC4-25600), CL22, DIMM Memory

    £16.74 Add to basket
    Quick View
  • £16.06

    Elite DDR4 Desktop Memory

    • New-generation product of DRAM module
    • 1.2 V memory module
    • Lifetime warranty
     
    TEAMGROUP’s ELITE series launches an all new DDR4 memory module product, with an operating voltage of only 1.2V, which saves a lot of power consumption. It reduces the heat generated by the product itself and also maintains the ambient temperature around the system. This product is fully compliant with JEDEC standards and is guaranteed to be 100% compatible with all major platforms on the market. The superb performance of TEAMGROUP’s ELITE series provides you with excellent quality of stability, long-term efficiency and low power consumption.
     

    174 in stock

    Team Elite 8GB, DDR4, 3200MHz (PC4-25600), CL22, DIMM Memory

    £16.06 Add to basket
    Quick View
  • £16.06

    Stable and Compatible

     
    • Original chips – Selected original chips, strict inspection process, 8-layer PCB board, stable performance.
    • Aluminum alloy vest – for strong heat dissipation effect, low working temperature, more stable operation
    • Gold-plated craft gold finger – Gold plating process, stronger conductivity and corrosion resistance

     

    Out of stock

    Netac Shadow Blue, 8GB, DDR4, 3200MHz (PC4-25600), CL16, DIMM Memory

    £16.06 Read more
    Quick View
  • £15.76
     
    ADATA Premier DDR4 3200 unbuffered-DIMM memory is the latest upgrade solution that supports Intel/AMD newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 25.6GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products.
     
     
    Meets Demanding Standards for New-Generation Platforms
    • Complies with JEDEC standards
    • RoHS compliant
    • Supports Intel® Core™ 8th/9th/10th series and AMD® ZEN 2nd 3rd Ryzen™ series
     
     
    Lifetime Warranty
    All ADATA memory modules are produced and tested using a rigorous quality control process for rapid computing and stable operation. In addition, ADATA memory modules provide customers a lifetime warranty for maximum assurance with excellent service.

     

     

    148 in stock

    ADATA Premier 8GB, DDR4, 3200MHz (PC4-25600), CL22, DIMM Memory

    £15.76 Add to basket
    Quick View
  • £15.48

    Stable and Compatible
     

    • Excellent compatibility – Netac Basic range memory products have passed the motherboard compatibility test for all mainstream brands on the market
    • Gold-plated craft gold finger – gold plating process, stronger conductivity and corrosion resistance
    • Lifetime warranty

     

    17 in stock

    Netac Basic, 8GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

    £15.48 Add to basket
    Quick View
  • £15.12

    Stable and Compatible

     
    • Original chips – Selected original chips, strict inspection process, 8-layer PCB board, stable performance.
    • Aluminum alloy vest – for strong heat dissipation effect, low working temperature, more stable operation
    • Gold-plated craft gold finger – Gold plating process, stronger conductivity and corrosion resistance

     

    Out of stock

    Netac Shadow Yellow, 8GB, DDR4, 3200MHz (PC4-25600), CL16, DIMM Memory

    £15.12 Read more
    Quick View
  • £14.92
    This document describes ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard  latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 
     
     
    • Power Supply: VDD = 1.2V Typical
    • VDDQ = 1.2V Typical
    • VPP = 2.5V Typical
    • VDDSPD = 2.2V to 3.6V
    • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
    • Low-power auto self refresh (LPASR)
    • Data bus inversion (DBI) for data bus
    • On-die VREFDQ generation and calibration
    • Single-rank
    • On-board I2 serial presence-detect (SPD) EEPROM
    • 8 internal banks; 2 groups of 4 banks each
    • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
    • Selectable BC4 or BL8 on-the-fly (OTF)
    • Fly-by topology
    • Terminated control command and address bus
    • PCB: Height 1.23” (31.25mm)
    • RoHS Compliant and Halogen-Free

    7 in stock

    Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

    £14.92 Add to basket
    Quick View
  • £14.53

    Stable and Compatible
     

    • Excellent compatibility – Netac Basic range memory products have passed the motherboard compatibility test for all mainstream brands on the market
    • Gold-plated craft gold finger – gold plating process, stronger conductivity and corrosion resistance
    • Lifetime warranty

     

    477 in stock

    Netac Basic, 8GB, DDR4, 3200MHz (PC4-25600), CL16, DIMM Memory

    £14.53 Add to basket
    Quick View
  • £9.01
     
    ADATA Premier DDR4 2666 unbuffered-DIMM memory is the latest upgrade solution that supports Intel's newest platforms for faster data transfer and enhanced power efficiency. Utilizing a 288-pin design, operating voltage has been reduced from 1.5V on DDR3 to 1.2V, which not only helps save power by 20%, but also boosts transfer bandwidth speed to 21.3GB/s. Every chip in ADATA memory modules meets strict JEDEC and RoHS standards, ensuring compatibility, stability, and environmentally friendly products.
     
     
    Lightning speed PCIe Gen3x4
    • Complies with JEDEC standards 
    • RoHS compliant 
    • Supports Intel Skylake-X and Kaby Lake-X CPU

     

    10 in stock

    ADATA Premier, 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

    £9.01 Add to basket
    Quick View