Home » ARCTIC

ARCTIC

View:28/All/

Showing 1–28 of 115 results

  • Arctic Liquid Freezer II 420 ARGB Liquid CPU Cooler, PWM Fans & PWM Controlled Pump
    £120.38

     

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Future-Proof Compatibility
     
    AMD is expected to release the AM5 socket, the successor to its popular AM4 platform, at the end of 2022. Since all mechanical dimensions remain identical, ARCTIC guarantees compatibility with our coolers on AMD's new processors.
     
    In addition, all coolers shipped by ARCTIC are already compatible with Intel's Alder Lake LGA1700 processors.
     
    Coolers purchased from resellers may have been shipped without the corresponding accessories. In this case, please contact ARCTIC customer support.
     
     
     
     
     
    Light Up Your Build
     
    The Liquid Freezer II A-RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with new A-RGB fans optimised for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.
     
     
     
     
     
    Efficient, In House Developed Pump
     
    Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of 0.8 W at no load, 2.3 W under normal load and a maximum of 6.78 W under full load for the entire AiO, without illumination.
     
     
     
     
     
    Premium Class Radiator
     
    Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.
     
    Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5C lower temperature increase in the temporary turbo mode of modern CPUs.
     
     
     
     
     
    Smooth VRM Fan
     
    Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100% convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, our customer service team will send you a replacement free of charge and easily, without a need to replace the entire unit.
     
    The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
     
     
     
     
     
    High Quality Hoses Withy Integrated Cable Managment
     
    The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large cases and effectively prevents the cooling liquid from evaporating, so that you do not have to worry about refilling the compact water cooling system.
     
    It also hides the cables of your radiator fans thanks to sophisticated cable management. So you only have to connect a plug to the mainboard, saving valuable time during installation. In the end, you won't need to hide any more cables and your view is reduced to just the essentials.
     
     
     
     
     
    Fan Optimised on Static Pressure
     
    The illuminated P-fans are already mounted on the compact water cooling system ex works with the following advantages:
     
    • High static pressure for improved cooling performance |2 mm H2O
    • Extended speed range | 200 – 1900 rpm (1800 rpm on the radiator)
    • Low power consumption | 0.17 A (0.2 A LEDs)
    • Less vibration and rubber bumpers | reduced by > 95%
    • Improved lifetime | 6 years warranty
    • High quality plain bearing 
    • PWM for synchronous pump/fan control 
    • RGB sharing for synchronous lighting
     

    19 in stock

    Arctic Liquid Freezer II 420 ARGB Liquid CPU Cooler, PWM Fans & PWM Controlled Pump

    £120.38 Add to basket
    Quick View
  • Arctic Liquid Freezer II ARGB 360mm Liquid CPU Cooler, PWM Fans & PWM Controlled Pump
    £110.89

     

    Multi Compatible All-in-One CPU Water Cooler with ARGB

     

    Light up your build
     
    The Liquid Freezer II A-RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with new RGB fans optimised for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.
     
     
     
     
     
    Efficient, in-house developed pump
     
    Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.8 W at no load, 2.5 W under normal load and a maximum of 5.3 W under full load for the entire AiO.
     
     
     
     
     
    Premium class radiator
     
    Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.
     
    Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5  C lower temperature increase in the temporary turbo mode of modern CPUs.
     
     
     
     
     
    Smooth VRM fan
     
    Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100% convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, our customer service team will send you a replacement free of charge and easily, without a need to replace the entire unit.
     
    The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15  C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
     
     
     
     
     
    High quality hoses with integrated cable management
     
    The fibre-reinforced, long EPDM tubing of the Liquid Freezer II allows installation even in large cases and effectively prevents the coolant from evaporating, so you don't have to worry about refilling the compact water cooling system.
     
    In addition, it hides both the RGB and PWM cables of your radiator fans thanks to a well thought-out cable management system. This way, you only have to connect two plugs to the mainboard and save valuable time during installation. In the end, you don't need to hide any more cables and your view is reduced to the essentials.
     
     
     
     
     
    Fan optimized on static pressure
     
    The illuminated P-fans are already mounted on the compact water cooling system ex works with the following advantages:
    • High static pressure for improved cooling performance |1.85 mm H2O
    • Extended speed range | 200 – 2000 rpm (1800 rpm on the radiator)
    • Low power consumption | 0.11A (0.2A RGB)
    • Less vibration and rubber bumpers | reduced by > 95%
    • Improved lifetime | 6 years warranty
    • High quality plain bearing 
    • PWM for synchronous pump/fan control 
    • RGB sharing for synchronous lighting
     
     
     
     
     
    The right configuration for everyone
     
    Thanks to its long hoses, availability in 5 different sizes and different lignting options the Liquid Freezer II Series is versatile. It is highly compatible and can be used effectively, from small form factor PCs (be aware of the radiator thickness!) to big towers.
     
    The Liquid Freezer II is the successor to the well-respected Liquid Freezer water cooler from ARCTIC.

    Out of stock

    Arctic Liquid Freezer II ARGB 360mm Liquid CPU Cooler, PWM Fans & PWM Controlled Pump

    £110.89 Read more
    Quick View
  • Arctic Liquid Freezer II 420mm Liquid CPU Cooler, PWM Fans & PWM Controlled Pump
    £109.38

    Multi Compatible All-In-One CPU Water Cooler
     

    • Compatible with Intel & AMD sockets.
    • In-House developed PWM controlled pump.
    • High performance allows overclocking.
    • Motherboard VRM cooling solution.
    • Pressure optimised fan.
    • Fully sleeved tubes.
    • Integrated cable management.
    • Maintenance-free water loop.
    • Secure hold with backplate.
     
    Using a wealth of experience gained from previous work on CPU water cooling, Arctic have returned with the Liquid Freezer II Series a multi-compatible high quality AIO cooler, featuring a custom designed completely new compact water cooling PWM pump and integrated cable management complete with sleeve tubing for a great clean aesthetic. The Liquid Freezer II 360, features 3x powerful 140mm Arctic P14 fans to give you outstanding heat transfer driven by high static pressure and outstanding performance making this all in one liquid water cooler perfect for hobbyists or enthusiasts that are looking for superior performance at lower noise levels.
     
     
     
     
     
    Brand New PWM Controlled Pump Design
     
    The Liquid Freezer II Series AIO coolers feature a newly developed PWM-controlled pump, boasting a copper base, improved efficiency, lower power usage and quiet operation. Unlike conventional pumps which continuously run at full load even under low demand, the Artic Freezer II series pump clocks down consuming less power and producing less noise if no cooling is needed, even with its additional fan for VRM cooling.
     
     
     
     
     
    Triple Fan Cooling
     
    The Liquid Freezer II 420 cooler feature the popular Arctic P12 fans, bringing with them the following advantages;
     
    • High Static Pressure
    • Broad RPM Range (200 – 1700RPM)
    • High Quality Bearings
    • Lower Power Consumption
    • PWM for synchronous fan/pump control
    • Extended Life Span
    • Less Vibrations
     
     
     
     
     
    Best in Class Radiator
     
    Unlike conventional AIO radiators, Arctic have opted for a 38mm thick radiator with a high fin density allowing a higher volume of water to be used in the circuit and the cooling surface can be significantly increased.

    Out of stock

    Arctic Liquid Freezer II 420mm Liquid CPU Cooler, PWM Fans & PWM Controlled Pump

    £109.38 Read more
    Quick View
  • Arctic Liquid Freezer II 280 ARGB 280mm Liquid CPU Cooler, PWM Fans & PWM Controlled Pump
    £104.81

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

    At the end of 2022, AMD has released the AM5 socket, the successor to its popular AM4 platform. Because all mechanical dimensions remain identical, we are able to guarantee the compatibility of ARCTIC coolers with AMD's new processors.
     
    Additionally, all coolers shipped by ARCTIC are already compatible with Intel's Alder Lake and Raptor Lake LGA1700 processors.

     

     

    Optimised for AMD Ryzen
    AMD has been using a new multi-die layout for its high-end AM4 processors for a few generations now. In these processors, the hotspot is not centered by the IHS (Integrated Heat Spreader). To still allow for optimal heat dissipation, we have developed a special mounting kit for the Liquid Freezer II that allows the cold plate to be placed directly over the hotspot of the CPU. AMD's upcoming 7000 series AM5 processors are also come with multi-die layouts and can therefore benefit from the Liquid Freezer II's unique offset mounting.
     

     

    Best CPU Water Cooler
    The Liquid Freezer II series has been tested numerous times by independent reviewers and praised for its performance, price and quietness. It consistently exceeds all expectations and sets new standards in compact water cooling. As a further mark of recognition, the Liquid Freezer II series was awarded the “European Hardware Award 2022” for the best CPU water cooler.
     

     

    Create Your Own Look
    The Liquid Freezer II A-RGB combines the Liquid Freezer II series' efficient, proprietary PWM water pump with ARCTIC's new A-RGB fans optimised for static pressure. This allows for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB Gen.2 technology and customizable LEDs, you can design your system with your very own look.
     

     

    Efficient, Proprietary Pump
    While many competitors use a generic water pump, we‘ve gone to great lengths to develop our own. The results? Quieter operation and higher efficiency. And, like the Liquid Freezer II’s fans, the water pump is PWM-controlled and adjusts its speed accordingly. This not only leads to significantly lower noise levels at low and typical loads, but also a much lower power consumption for all components of the AiO.
     

     

    Premium Class Radiator
    Unlike most all-in-one liquid cooling manufacturers, we rely on 38mm thick radiators with a high fin density. This allows a larger amount of water to be used in the circuit and significantly increases the cooling surface area.
     
    Water has a much higher heat capacity than aluminum or copper. This leads to a slower and an up to 5 °C lower temperature increase in the time-limited turbo mode of modern CPUs.
     

     

    Quiet VRM Fan
    Small fans have the reputation of being particularly loud and not very durable; that’s why we set out to develop a quiet, sturdy diagonal fan especially for the Liquid Freezer II. We’re 100% convinced that this 40 mm fan is just as durable as our other case fans. If the fan doesn’t live up to our claims, our customer service team will send you a replacement free of charge (without you having to replace the entire unit).
     
    The fan is PWM-controlled and can cool your voltage converters and the socket area almost inaudibly by up to 15 °C especially in overclocking scenarios, with insufficient VRM cooling or in cases with low airflow and thus allows continuous high load. Provided there is sufficient VRM cooling, it can be turned off at will.
     

     

    High Quality Tubing with Integrated Cable Management
    The Liquid Freezer II's fiber-reinforced 45 cm tubing allows for installation even in large cases and effectively prevents coolant evaporation, so you don't have to worry about refilling your compact water cooling system.
     
    Plus, our sophisticated cable management hides both the RGB and PWM cables of your radiator fans in the sleeving.
     
    This makes installation easy and tidy: you only have to connect two connectors to the mainboard, and there are no other cables to hide.
     
     
    Fans Optimised for Static Pressure
    The illuminated P-fans are already mounted on the radiator from the factory. During the development of the new P-serie fans, special emphasis was placed on a focused airflow and thus a high static pressure. The fans guarantee extremely efficient cooling, even with increased air resistance. Therefore, the P-series fans are particularly suitable for use on heatsinks and radiators.

     

    9 in stock

    Arctic Liquid Freezer II 280 ARGB 280mm Liquid CPU Cooler, PWM Fans & PWM Controlled Pump

    £104.81 Add to basket
    Quick View
  • Arctic Liquid Freezer III A-RGB 420mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White
    £91.60

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 420mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White

    £91.60 Read more
    Quick View
  • Arctic Liquid Freezer III A-RGB 420mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black
    £89.31

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 420mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black

    £89.31 Read more
    Quick View
  • Arctic Liquid Freezer III A-RGB 360mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White
    £88.53

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 360mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White

    £88.53 Read more
    Quick View
  • Arctic Z2-3D Gen 3 Dual Monitor Arm with 4-Port USB 3.2 Hub, Gas Spring, up to 34″ Monitors, 180° Swivel, 360° Rotation
    £86.44
     
     
    Full Mobility  for More Comfort
    Thanks to the Z2-3D (Gen 3)'s gas lift technology, the screen can be pulled up or pushed away smoothly and moved freely vertically.
     
     
     
    Ergonomic Screen Positioning
    Our monitor arms are height adjustable and allow you to easily adjust your screen to the ideal, ergonomic screen setting. The top of screen should sit just below eye level.
     
     
     
    Work with Multiple Monitors
    Add a second screen and increase your productivity with the Z2-3D (Gen 3) monitor arm.
     
     
     
    Enhanced Workspace
    The Z2-3D (Gen 3) monitor arm helps with keeping the desk tidy and creates more valuable space for the important things.
     
     
     
    SuperSpeed USB Hub
    The SuperSpeed USB Hub provides a convenient place on your desk for connecting USB devices, ensuring your gadgets are always within reach. Up to four devices can be connected simultaneously.
     
     
     
    Compatible with Ultrawide Monitors
    The ARCTIC Z2-3D (Gen 3) monitor arm supports the latest ultrawide monitors (up to 29 inches) with ease. Classic 16:9 monitors are also compatible (up to 34 inches). The Z2-3D (Gen 3) supports monitors with 8 kg/17.6 lbs per arm.
     
     
     
    Cable Management
    Sick of cable clutter? Free up space on your desk with the Z2-3D (Gen 3)'s included cable management.

    Out of stock

    Arctic Z2-3D Gen 3 Dual Monitor Arm with 4-Port USB 3.2 Hub, Gas Spring, up to 34″ Monitors, 180° Swivel, 360° Rotation

    £86.44 Read more
    Quick View
  • Arctic Liquid Freezer III A-RGB 360mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black
    £83.49

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 360mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black

    £83.49 Read more
    Quick View
  • Arctic Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White
    £81.36

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White

    £81.36 Read more
    Quick View
  • Arctic Z3 Pro (Gen3) Triple Monitor Arm with 4-Port USB 3.0 Hub, Up to 32″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation
    £80.81
     
    Reclaim Space on Your Desk
    Whether you use it as your workstation or your battle station, the ARCTIC Z3 Pro monitor arm is the tool you need to keep your desk clutter free, allowing you to increase productivity and level up your gaming.
     
     
    Optimised Ergonomics
    If you spend a lot of time in front of the screen, you'll quickly come to appreciate the ergonomic advantages of the Z3 Pro, especially the ability to customize your viewing angle. Finding the optimal setting for your screens improves your posture. Whether you want to adjust the height, angle or screen orientation, the Z3 Pro enhances the ergonomic capabilities of your desk and office chair, offering you comfort and adaptability.
     
     
    Also Suitable for Ultrawide Monitors
    The ARCTIC Z3 Pro monitor arm supports the latest ultrawide monitors (up to 29 inches) with ease. Classic 16:9 monitors are also compatible (up to 32 inches). The Z3 Pro supports monitors of 15 kg/33 lbs per arm.
     
     
    Optimal Alignment
    The mounting head of the ARCTIC Z3 Pro makes installation and subsequent alignment changes uncomplicated and easy to manage. It doesn't matter if you want to slightly tilt your monitor or turn it 180 degrees – the only tools you need are your hands.
     
     
    USB Hub
    The stylish 3.0 USB hub brings four ports directly where you need them most – on your desk.
     
     
    Cable Management
    Sick of cable clutter? With the Z3 Pro's included cable management, unruly cables are a thing of the past.
     
     
    Simple and Fast Setup
    With just a few simple steps and the included tools, the Z3 Pro is ready to use at your table in no time.
     

    Out of stock

    Arctic Z3 Pro (Gen3) Triple Monitor Arm with 4-Port USB 3.0 Hub, Up to 32″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation

    £80.81 Read more
    Quick View
  • Arctic Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black
    £78.95

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 280mm Liquid CPU Cooler, P14 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black

    £78.95 Read more
    Quick View
  • Arctic Liquid Freezer III 420mm Liquid CPU Cooler, P14 PWM PST Fans & PWM Controlled Pump
    £76.54

    Multi Compatible All-in-One CPU Water Cooler

     

    Ready Out-of-the-Box – Easy Installation

    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     
    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     
    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     
    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     
    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     
     
    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     

    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     
    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     
    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     
    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.

     

    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III 420mm Liquid CPU Cooler, P14 PWM PST Fans & PWM Controlled Pump

    £76.54 Read more
    Quick View
  • Arctic Liquid Freezer III 360mm Liquid CPU Cooler, P12 PWM PST Fans & PWM Controlled Pump
    £71.89

    Multi Compatible All-in-One CPU Water Cooler

     

    Ready Out-of-the-Box – Easy Installation

    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     
    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     
    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     
    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     
    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     
     
    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     

    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     
    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     
    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     
    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.

     

    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III 360mm Liquid CPU Cooler, P12 PWM PST Fans & PWM Controlled Pump

    £71.89 Read more
    Quick View
  • Arctic Liquid Freezer III A-RGB 240mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White
    £71.88

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 240mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, White

    £71.88 Read more
    Quick View
  • Arctic Liquid Freezer III A-RGB 240mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black
    £69.57

    Multi Compatible All-in-One CPU Water Cooler with A-RGB

     
     
     
    Ready Out-of-the-Box – Easy Installation
     
    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     

    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     

    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     

    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     

     

    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     

     

    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     
    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     

    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     

    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     

    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.
     
     
     
    Addressable LEDs for all Requirements
    ARCTIC uses standardised 3-pin cables instead of proprietary connectors. This not only ensures compatibility with most lighting systems for motherboards, cases, controllers and accessories, but also enables software-based control with the most common control programmes. The daisy-chain function also ensures that each LED can display an individual colour at any time, offering countless combination options for every preference.
     
     
     
    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III A-RGB 240mm Liquid CPU Cooler, P12 PWM PST ARGB Fans & ARGB PWM Controlled Pump, Black

    £69.57 Read more
    Quick View
  • Arctic Liquid Freezer III 280mm Liquid CPU Cooler, P14 PWM PST Fans & PWM Controlled Pump
    £68.42

    Multi Compatible All-in-One CPU Water Cooler

     

    Ready Out-of-the-Box – Easy Installation

    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     
    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     
    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     
    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     
    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     
     
    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     

    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     
    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     
    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     
    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.

     

    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III 280mm Liquid CPU Cooler, P14 PWM PST Fans & PWM Controlled Pump

    £68.42 Read more
    Quick View
  • Arctic Z2 Pro (Gen3) Dual Monitor Arm with 4-Port USB 3.0 Hub, Up to 34″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation
    £63.96
    Reclaim Space on Your Desk
    Whether you use it as your workstation or your battle station, the ARCTIC Z2 Pro monitor arm is the tool you need to keep your desk clutter free, allowing you to increase productivity and level up your gaming.
     
     
    Optimised Ergonomics
    If you spend a lot of time in front of the screen, you'll quickly come to appreciate the ergonomic advantages of the Z2 Pro, especially the ability to customize your viewing angle. Finding the optimal setting for your screens improves your posture. Whether you want to adjust the height, angle or screen orientation, the Z2 Pro enhances the ergonomic capabilities of your desk and office chair, offering you comfort and adaptability.
     

     

    Also Suitable for Ultrawide Monitors
    The ARCTIC Z2 Pro monitor arm supports the latest ultrawide monitors (up to 29 inches) with ease. Classic 16:9 monitors are also compatible (up to 34 inches). The Z2 Pro supports a total load of 15 kg/33 lbs.
     

     

    Optimal Alignment
    The mounting head of the ARCTIC Z2 Pro makes installation and subsequent alignment changes uncomplicated and easy to manage. It doesn't matter if you want to slightly tilt your monitor or turn it 180 degrees – the only tools you need are your hands.
     

     

    USB Hub
    The stylish 3.0 USB hub brings four ports directly where you need them most – on your desk.
     

     

    Cable Management
    Sick of cable clutter? With the Z2 Pro's included cable management, unruly cables are a thing of the past.
     

     

    Simple and Fast Setup
     
    With just a few simple steps and the included tools, the Z2 Pro is ready to use at your table in no time.
     

    Out of stock

    Arctic Z2 Pro (Gen3) Dual Monitor Arm with 4-Port USB 3.0 Hub, Up to 34″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation

    £63.96 Read more
    Quick View
  • Arctic Liquid Freezer III 240mm Liquid CPU Cooler, P12 PWM PST Fans & PWM Controlled Pump
    £60.31

    Multi Compatible All-in-One CPU Water Cooler

     

    Ready Out-of-the-Box – Easy Installation

    The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.
     
     
    Future-Proof Compatibility
    The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.
     
     
    Silent and Powerful VRM Fan
    The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.
     
     
    Contact Frame for Intel LGA1700 and LGA1851
    Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patent-pending mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
     
     
    Optimised, In-House Developed Water Pump
    The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
     
     
    Complete Control or Simple Control
    Two connection cables – two control options:
    • Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
    • All-in-One: Like the Liquid Freezer II, this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting.
     
     

    Native AMD Offset Mounting
    For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.
     
     
    Improved Radiator Design
    The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
     
     
    High Static Pressure
    ARCTIC relies on the well-proven P fans, which have already received several awards for their outstanding performance. The P series is particularly suitable for use on heat sinks and radiators with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation.
     
     
    Limited Compatibility with Few Motherboards
    Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.

     

    Quality You Can Rely On
    To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

     

    Out of stock

    Arctic Liquid Freezer III 240mm Liquid CPU Cooler, P12 PWM PST Fans & PWM Controlled Pump

    £60.31 Read more
    Quick View
  • Arctic Z1 Pro Gen 3 Single Monitor Arm with 4-Port USB 3.0 Hub, up to 43″ Monitors / 49″ Ultrawide, 180° Swivel, 360° Rotation
    £51.52
     
    Reclaim Space on Your Desk
     
    Whether you use it as your workstation or your battle station, the ARCTIC Z1 Pro monitor arm is the tool you need to keep your desk clutter free, allowing you to increase productivity and level up your gaming.

     

    Optimised Ergonomics
     
    If you spend a lot of time in front of the screen, you'll quickly come to appreciate the ergonomic advantages of the Z1 Pro, especially the ability to customize your viewing angle. Finding the optimal setting for your screens improves your posture. Whether you want to adjust the height, angle or screen orientation, the Z1 Pro enhances the ergonomic capabilities of your desk and office chair, offering you comfort and adaptability.

     

    Also Suitable for Ultrawide Monitors
     
    The ARCTIC Z1 Pro monitor arm supports the latest ultrawide monitors (up to 49 inches) with ease. Classic 16:9 monitors are also compatible (up to 43 inches). The Z1 Pro supports a total load of 15 kg/33 lbs.

     

    Optimal Alignment
     
    The mounting head of the ARCTIC Z1 Pro makes installation and subsequent alignment changes uncomplicated and easy to manage. It doesn't matter if you want to slightly tilt your monitor or turn it 180 degrees – the only tools you need are your hands.

     

    USB Hub
     
    The stylish 3.0 USB hub brings four ports directly where you need them most – on your desk.

     

    Cable Management
     
    Sick of cable clutter? With the Z1 Pro's included cable management, unruly cables are a thing of the past.

     

    Simple and Fast Setup
     
    With just a few simple steps and the included tools, the Z1 Pro is ready to use at your table in no time.

    4 in stock

    Arctic Z1 Pro Gen 3 Single Monitor Arm with 4-Port USB 3.0 Hub, up to 43″ Monitors / 49″ Ultrawide, 180° Swivel, 360° Rotation

    £51.52 Add to basket
    Quick View
  • Arctic Freezer 4U-M Multicompatible 4U Single Tower CPU Cooler, Intel/AMD Server CPUs, Continuous Operation, Dual Socket Compatibility, 350W TDP
    £49.69

    Versatile Multi-Compatible Server Cooler

    The Freezer 4U-M stands as a multi-compatible server cooler, boasting an expansive contact surface and an enhanced mounting mechanism. It now offers compatibility with a wide range of Intel and AMD server processors, including Intel's LGA 4189 and LGA 4677, as well as AMD's SP6, sTR5, SP3, TR4, sTRX4, and sWRX8 sockets. Remarkably, despite its impressive cooling capabilities, the Freezer 4U consumes a mere 2.88 watts, ensuring exceptional efficiency in cooling even the most powerful processors with up to 64 cores and a TDP of up to 350 watts.
     

     

    RAM Compatibility and Clearance
    The Freezer 4U offers a spacious 53 mm of RAM clearance, allowing for the use of memory sticks with moderate heatsinks. This clearance allows efficient airflow and enables compatibility with different RAM variants.
     

     

    Compact Design and Dual Socket Compatibility
    With an optimised installation height of only 145 mm, it fits into both classic 4U server racks and most consumer 4U cases available on the market. The Freezer 4U features a compact design with dimensions of just 156 x 124 mm. This also makes it suitable for dual-socket motherboards. To adjust the airflow direction if required, the fans can be easily swapped over.
     

     

    Powerful Fans in Push-Pull Configuration
    The installed PWM fans benefit from all the advantages of the award-winning P series. Designed for static pressure, the fans are ideal for the Freezer 4U-M's high fin density and provide efficient heat dissipation in push-pull mode, even in power-hungry applications. Especially office workstations benefit from the quiet fans. The dual configuration also allows for inherent redundancy and protects the system from total shutdown caused by heat.
     

     

    Designed for continuous operation
    Both fans of the Freezer 4U-M are equipped with dual ball bearings, which allows for 24/7 continuous operation without the slightest compromise in performance. This type of bearing is much more resistant to contamination and wear caused by high temperatures than conventional sleeve bearings or Fluid-Dynamic bearings and is therefore the perfect choice if you want to ensure fault-free continuous operation.
     

     

    Premium Thermal Paste Included
    The Freezer 4U-M comes with MX-6 thermal paste. ARCTIC's Ultimate Performance thermal paste reduces the heat build-up between the heat spreader of the CPU and the cooler. The thermal paste is neither conductive nor capacitive and therefore absolutely safe to use.

     

    7 in stock

    Arctic Freezer 4U-M Multicompatible 4U Single Tower CPU Cooler, Intel/AMD Server CPUs, Continuous Operation, Dual Socket Compatibility, 350W TDP

    £49.69 Add to basket
    Quick View
  • Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Grey/White, Intel & AMD Sockets, Bionix P Fans, Fluid Dynamic Bearing, 210W TDP
    £48.18
     

    Tower CPU Cooler with BioniX P-Series Fans in Push-Pull-Configuration

    With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.

     

     
    New P-Fans for Increased Performance
    The Freezer 34 eSports DUO benefits of all advantages of our new BioniX P-fans.
    • High static pressure for increased cooling performance
    • 0 db fan mode below 5 % PWM
    • Extended RPM range
    • Lower power consumption
    • Fewer vibrations
    • Extended life span
    • High quality bearing
    • PWM PST for synchronous fan control
     
     
    Better Cooling – Better Performance
    No thermal throttling on your CPU – even at high turbo clock speeds and overclocking, the Freezer 34 eSports DUO cools quietly, so you can reach the maximum FPS with minimal noise levels for the smoothest possible gaming experience.
     
     
    Improved Heat Dissipation
    Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to ideal heat dissipation for the Freezer 34 eSports DUO.
     
     

    Ideal airflow
    The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-configuration The resulting increase of airflow 
    ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even 
    faster from the heat sink. This ensures the best possible performance of the CPU.
     
     
    Thermal Coating
    A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.
     
     
    High Performance for High-End CPU
    The contact surface of the Freezer 34 eSports DUO heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.
     
     
    MX-4 Thermal Paste Included
    The high-performance MX-4 thermal compound is included and ensures the best cooling results.
     
     
    Easy Installation & Secure Hold
    Fast and easy to install and extremely reliable, the Freezer 34 eSports DUO mounting system is compatible 
    with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports DUO is not only 
    foolproof to install, but also absolutely transport safe.
     
     
    Optimal RAM Compatibility
    Thanks to its compact dimensions of only 124 x 157 x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues and are not blocked by the CPU Cooler.
     
     
    Multilingual Manuals
    We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. 
    Put the QR code sticker somewhere convenient and never waste time again looking for product instructions

     

    Out of stock

    Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Grey/White, Intel & AMD Sockets, Bionix P Fans, Fluid Dynamic Bearing, 210W TDP

    £48.18 Read more
    Quick View
  • Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Black & Red, Intel & AMD Sockets, Bionix Fan, Fluid Dynamic Bearing
    £44.44
     

    Tower CPU Cooler with BioniX P-Series Fans in Push-Pull-Configuration

     

    Excellent Price-Performance Ratio
    With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.
     
     
    New P-Fans for Increased Performance
    The Freezer 34 eSports DUO benefits of all advantages of our new BioniX P-fans.
    • High static pressure for increased cooling performance
    • 0 db fan mode below 5 % PWM
    • Extended RPM range
    • Lower power consumption
    • Fewer vibrations
    • Extended life span
    • High quality bearing
    • PWM PST for synchronous fan control
     
     
    Better Cooling – Better Performance
    No thermal throttling on your CPU – even at high turbo clock speeds and overclocking, the Freezer 34 eSports DUO cools quietly, so you can reach the maximum FPS with minimal noise levels for the smoothest possible gaming experience.
     
     
    Improved Heat Dissipation
    Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to ideal heat dissipation for the Freezer 34 eSports DUO.
     
     
    Ideal airflow
    The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-configuration The resulting increase of airflow 
    ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even 
    faster from the heat sink. This ensures the best possible performance of the CPU.
     
     
    Thermal Coating
    A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.
     
     
    High Performance for High-End CPU
    The contact surface of the Freezer 34 eSports DUO heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.
     
     
    MX-4 Thermal Paste Included
    The high-performance MX-4 thermal compound is included and ensures the best cooling results.
     
     
    Easy Installation & Secure Hold
    Fast and easy to install and extremely reliable, the Freezer 34 eSports DUO mounting system is compatible 
    with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports DUO is not only 
    foolproof to install, but also absolutely transport safe.
     
     
    Optimal RAM Compatibility
    Thanks to its compact dimensions of only 124 x 157 x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues and are not blocked by the CPU Cooler.
     
     
    Multilingual Manuals
    We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. 
    Put the QR code sticker somewhere convenient and never waste time again looking for product instructions.

     

    Out of stock

    Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Black & Red, Intel & AMD Sockets, Bionix Fan, Fluid Dynamic Bearing

    £44.44 Read more
    Quick View
  • Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Black & White, Intel & AMD Sockets, Bionix Fan, Fluid Dynamic Bearing
    £44.18
     

    Tower CPU Cooler with BioniX P-Series Fans in Push-Pull-Configuration

     

    Excellent Price-Performance Ratio
    With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.
     
     
    New P-Fans for Increased Performance
    The Freezer 34 eSports DUO benefits of all advantages of our new BioniX P-fans.
    • High static pressure for increased cooling performance
    • 0 db fan mode below 5 % PWM
    • Extended RPM range
    • Lower power consumption
    • Fewer vibrations
    • Extended life span
    • High quality bearing
    • PWM PST for synchronous fan control
     
     
    Better Cooling – Better Performance
    No thermal throttling on your CPU – even at high turbo clock speeds and overclocking, the Freezer 34 eSports DUO cools quietly, so you can reach the maximum FPS with minimal noise levels for the smoothest possible gaming experience.
     
     
    Improved Heat Dissipation
    Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to ideal heat dissipation for the Freezer 34 eSports DUO.
     
     
    Ideal airflow
    The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-configuration The resulting increase of airflow 
    ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even 
    faster from the heat sink. This ensures the best possible performance of the CPU.
     
     
    Thermal Coating
    A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.
     
     
    High Performance for High-End CPU
    The contact surface of the Freezer 34 eSports DUO heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.
     
     
    MX-4 Thermal Paste Included
    The high-performance MX-4 thermal compound is included and ensures the best cooling results.
     
     
    Easy Installation & Secure Hold
    Fast and easy to install and extremely reliable, the Freezer 34 eSports DUO mounting system is compatible 
    with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports DUO is not only 
    foolproof to install, but also absolutely transport safe.
     
     
    Optimal RAM Compatibility
    Thanks to its compact dimensions of only 124 x 157 x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues and are not blocked by the CPU Cooler.
     
     
    Multilingual Manuals
    We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. 
    Put the QR code sticker somewhere convenient and never waste time again looking for product instructions.
     

    Out of stock

    Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Black & White, Intel & AMD Sockets, Bionix Fan, Fluid Dynamic Bearing

    £44.18 Read more
    Quick View
  • Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Grey, Intel & AMD Sockets, Bionix P Fans, Fluid Dynamic Bearing, 210W TDP
    £43.67

     

    Tower CPU Cooler with BioniX P-Series Fans in Push-Pull-Configuration

    With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.

     

     
    New P-Fans for Increased Performance
    The Freezer 34 eSports DUO benefits of all advantages of our new BioniX P-fans.
    • High static pressure for increased cooling performance
    • 0 db fan mode below 5 % PWM
    • Extended RPM range
    • Lower power consumption
    • Fewer vibrations
    • Extended life span
    • High quality bearing
    • PWM PST for synchronous fan control
     
     
    Better Cooling – Better Performance
    No thermal throttling on your CPU – even at high turbo clock speeds and overclocking, the Freezer 34 eSports DUO cools quietly, so you can reach the maximum FPS with minimal noise levels for the smoothest possible gaming experience.
     
     
    Improved Heat Dissipation
    Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to ideal heat dissipation for the Freezer 34 eSports DUO.
     
     

    Ideal airflow
    The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-configuration The resulting increase of airflow 
    ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even 
    faster from the heat sink. This ensures the best possible performance of the CPU.
     
     
    Thermal Coating
    A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.
     
     
    High Performance for High-End CPU
    The contact surface of the Freezer 34 eSports DUO heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.
     
     
    MX-4 Thermal Paste Included
    The high-performance MX-4 thermal compound is included and ensures the best cooling results.
     
     
    Easy Installation & Secure Hold
    Fast and easy to install and extremely reliable, the Freezer 34 eSports DUO mounting system is compatible 
    with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports DUO is not only 
    foolproof to install, but also absolutely transport safe.
     
     
    Optimal RAM Compatibility
    Thanks to its compact dimensions of only 124 x 157 x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues and are not blocked by the CPU Cooler.
     
     
    Multilingual Manuals
    We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. 
    Put the QR code sticker somewhere convenient and never waste time again looking for product instructions

     

    Out of stock

    Arctic Freezer 34 eSports DUO Edition Heatsink & Fan, Grey, Intel & AMD Sockets, Bionix P Fans, Fluid Dynamic Bearing, 210W TDP

    £43.67 Read more
    Quick View
  • Arctic X1-3D Single Gas Spring Monitor Arm, Up to 40″ Monitors / 43″ Ultrawide, 180° Swivel, 360° Rotation
    £43.05

     

    Desk Mount Gas Spring Monitor Arm

    Full Motion For More Comfort

    Thanks to the approved gas lift technology, the monitor can be moved completely freely in all directions, even after installation. This makes it child's play to pull the monitor up, move it away or completely realign the height, depth and tilt.

    Ergonomic Screen Adjustment

    The X1-3D turns the simplest screens into ergonomic wonders, and those who spend a lot of time in front of a screen will quickly appreciate this advantage: The optimal adjustment of your screens automatically promotes an ergonomic sitting posture. It doesn't matter whether you work sitting or standing, the monitor arm allows you to optimally adjust it to your environment.

     

    Enlarged Working Area

    Whether you use your desk as a workstation, battlestation or a mix of both. By keeping your 'neutral reach zone' free, the X1-3D provides more space around the monitors and allows you new ways to set up and optimise your workspace.

     

    Less Visible Cables
     
    With the X1-3D, tangled cables around monitors are a thing of the past. The cables can simply be carried and fixed inside the arm. They thus disappear from the visible area and support a tidy overall appearance.

     

    Simple And Quick Assembly
     
    Thanks to the table clamp, the monitor arm can be placed freely and easily on the edge of the table. The arm is completely pre-assembled and is simply placed on the rod. Assembly or later repositioning is therefore child's play and can be done quickly.

     

    Universally Compatible
     
    The monitor arm supports ultrawide monitors with a screen diagonal of up to 49", as well as 16:9 monitors with a diagonal of up to 43". The monitor must have a VESA 75 or VESA 100 mount and must not exceed a total weight of 15 kg.
     
     

    2 in stock

    Arctic X1-3D Single Gas Spring Monitor Arm, Up to 40″ Monitors / 43″ Ultrawide, 180° Swivel, 360° Rotation

    £43.05 Add to basket
    Quick View
  • Arctic 12cm P12 Pressure Optimised PWM PST ARGB Case Fans (3 Pack), Fluid Dynamic, 12 LEDs, 0-2000 RPM, 0dB Mode, White
    £40.39

    Semi-Passive 120 mm Fan with Digital A-RGB – 3 Pack
     

    • Optimised for high static pressure
    • Ideal choice on heatsinks, radiators and (partly-) covered case vents
    • PWM Sharing Technology (PST) regulates fan speed synchronously
    • Static Pressure: 1.85 mm H2O

     

    RGB For Full Colour Control
    The P12 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
     
     
    0DB Mode – Zero RPM
    The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
     
     
    Maximum Smoothness, Minimum Vibration
    The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB 0dB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
     
     
    Optimised For High Static Pressure
    The P12 PWM PST A-RGB 0dB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
     
     
    0 TO 2000 RPM Controlled Via PWM PST
    With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB 0dB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
     
     
    High Quality Plain Bearing
    Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.

    Out of stock

    Arctic 12cm P12 Pressure Optimised PWM PST ARGB Case Fans (3 Pack), Fluid Dynamic, 12 LEDs, 0-2000 RPM, 0dB Mode, White

    £40.39 Read more
    Quick View
  • Arctic Z2 (Gen 3) Dual Monitor Arm with 4-Port USB 2.0 Hub, Up to 34″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation
    £39.46
     
    Reclaim Space on Your Desk
     
    Whether you use it as your workstation or your battle station, the ARCTIC Z2 monitor arm is the tool you need to keep your desk clutter free, allowing you to increase productivity and level up your gaming.
     

     

    Optimised Ergonomics
     
    If you spend a lot of time in front of the screen, you'll quickly come to appreciate the ergonomic advantages of the Z2, especially the ability to customize your viewing angle. Finding the optimal setting for your screens improves your posture. Whether you want to adjust the height, angle or screen orientation, the Z2 enhances the ergonomic capabilities of your desk and office chair, offering you comfort and adaptability.
     

     

    Also Suitable for Ultrawide Monitors
     
    The ARCTIC Z2 monitor arm supports the latest ultrawide monitors (up to 29 inches) with ease. 
    Classic 16:9 monitors are also compatible (up to 34 inches). The Z2 supports a total load of 15 kg/33 lbs.
     

     

    Optimal Alignment
     
    The mounting head of the ARCTIC Z2 makes installation and subsequent alignment changes uncomplicated and easy to manage. It doesn't matter if you want to slightly tilt your monitor or turn it 180 degrees – the only tools you need are your hands.
     

     

    USB Hub
     
    The stylish 2.0 USB hub brings four ports directly where you need them most – on your desk.
     

     

    Cable Management
     
    Sick of cable clutter? With the Z2's included cable management, unruly cables are a thing of the past.
     

     

    Simple and Fast Setup
     
    With just a few simple steps and the included tools, the Z2 is ready to use at your table in no time.

    Out of stock

    Arctic Z2 (Gen 3) Dual Monitor Arm with 4-Port USB 2.0 Hub, Up to 34″ Monitors / 29″ Ultrawide, 180° Swivel, 360° Rotation

    £39.46 Read more
    Quick View