Auto-negotiation of Half-Duplex / Full-Duplex transfer mode
Complies with IEEE 802.3ab and IEEE 802.3z
FX port supports hot-swappable
Maximum transmission distance depends on the inserting SFP
The MC220L is a media converter designed to convert between 1000BASE-SX/LX fiber and 10/100/1000Base-T copper media. It easily extends the distance of an existing gigabit network via fiber optic when integrated with the SFP Module. The MC220L applies the IEEE802.3ab 1000Base-T & IEEE802.3z 1000Base-SX/LX standards as part of its intended use with multi-mode/single-mode SFP Module. Long-range point-to-point connections are easily built with the gigabit fiber converters, making them ideal for network connections across multiple buildings, for remote surveillance and automated factory equipment.
MC220L offers flexible installation on standalone desktops or inserted into a chassis (TP-Link TL-MC1400). The easy-to-view front panel status LEDs provides real-time status information to monitor up-to-the-minute network activity. While the maximum transmission distance of fiber optic depends on the inserting SFP Module.
Interface(s): 8 x XGS-PON & GPON Combo Ports (SFP+) 2 x 40G QSFP+ Ports 2 x 10G SFP+ Ports 1 x RJ45 Management Port 1 x RJ45 Console Port 1 x Alarm Port
Button: Reset Button
Power Supply: “Dual Power Supplies: 2 AC, 2 DC or AC+DC, AC: 100V~240V, 50/60Hz DC: -38.4V~-72V Power Consumption: Max. 109.2W”
Data Rates: “GPON: Downstream: 2.5 Gbps, Upstream: 1.25 Gbps
Interface(s): 16 x GPON Ports 4 x 10 Gbps SFP+ Uplink Ports 2 x 10/100/1000 Mbps RJ45 Uplink Ports 1 x RJ45 Console Port 1 x RJ45 MGMT Port 1 x Alarm Port
Button: Reset Button
Power Supply: “Dual Power Supply: 2 AC, 2DC or AC + DC AC: 100V~240V, 50/60 Hz DC: -38.4V~-72V Power Consumption: Max. 103W”
Data Rates: Downstream: 2.5 Gbps Upstream: 1.25 Gbps
Wavelength: Tx: 1490 nm Rx: 1310 nm
Fiber Type: 9/125um SMF (Single Mode Fiber)
Distance: 60 km
Max. Splitting Ratio: 1:128
DHCP: DHCP Server DHCP Relay
Multi-Service: Multi-Service Traffic Identify and Rate Limit
QoS: IEEE 802.1p/DSCP QoS Voice VLAN Auto VoIP
Routing: Static Routing
Mulitcast: IGMP Snooping MLD Snooping
Security: ACL 802.1x Authentication ARP Inspection IP Source Guard
ONU Security: Rouge ONU Detection and Isolation Uplink and Downlink Data Encryption
Management: “OMCI: Standard OMCI Management Supported
Basic Functions: Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Extends fiber distance up to 0.55km using 50/125um fiber Extends fiber distance up to 0.22km using 62.5/125um fiber
Ports: 1 x 1000M SC/UPC port 1 x 10/100/1000M RJ45 port (Auto MDI/MDIX)
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behaviour or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
